|
|
Stroke mechanism of bridge crane
Drábík, Michal ; Sedláček, Martin (referee) ; Škopán, Miroslav (advisor)
This bachelor thesis is focused on the design stroke mechanism of bridge crane with load capacity of 10 000kg. The thesis contains a critical research of today-manufactured crane trolleys and a selection of a suitable conception. Part of the design are calculations of the lifting mechanism base parts, for example: rope diameter, pulleys diameters, complete dimensions of the rope drum, selection and the design of the electric motor, gearbox, brake, frequency inverter, gear and drum coupling. Last chapter is focused on the strength calculation of the rope drum, durability of the bearing, weld strength examination and radial load. Part of the thesis is the lifting mechanism assembly drawing documentations and the rope drum welding assembly.
|
|
|
Stroke mechanism of bridge crane
Jirásek, Jiří ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
This bachelor thesis deals with the design of the lifting mechanism of the crane cat, for a bridge storage crane with a load capacity of 8,000 kg. The thesis contains a critical research of similar existing solutions and the selection of the appropriate concept. The design includes calculations of the basic parameters of the stroke, and based on them selects appropriate rope, pulleys, and design of the rope drum. Furthermore, there are calculated and selected suitable components of the stroke mechanism such as electric motor, clutch, brake and gearbox. The last part deals with the design of the bearing, the drum pin and the calculation of the shaft key. The output of the work is the technical drawing of the whole assembly of the mechanism and the welding subassembly of the rope drum.
|
|
|
Crane Stroke Mechanism 8 t
Marek, Vlastimil ; Hloska, Jiří (referee) ; Škopán, Miroslav (advisor)
This bachelor thesis contents design of overhead crane stroke mechanism with working load 8 000 kg. Thesis contains research of currently produced crane trolleys, detailed calculation of stroke mechanism and proposal for purchased parts such as electromotor, brake and gearbox. Thesis is also supplemented by assembly drawing of stroke mechanism and welded assembly drawing of rope drum.
|
|
|
Recovery winch for mobile machinen
Tichý, Štěpán ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
Bachelor’s thesis deals with design rope winch for mobile machines with a maximum pulling force of 20000 N. The work consists of technical report and drawings. Technical report includes a search of the current solution, designs and controls rope, rope drum, electromotor, gearbox and bearings. Next the work includes custom design of semiautomatic mechanical clutch with the calculation components of which it is composed. Design documentation includes component drawing and drawing the rope drum.
|
|
|
Overhead electric hoist
Hruška, Miroslav ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
The theme of this bachelor’s thesis is overhead electric hoist, designed for lifting capacity 1,500 kg. It produced a technical report containing the calculation and design of electrical drives and lifting travel hoists including control of these drives. There are also carried out appropriate travel gear and travel, clutches, brakes and bearings and strength calculation of ropes and rope drum. Part of this work is to build the entire proposed drawing devices.
|
|
|
Stroke mechanism of bridge crane
Tomeš, Jakub ; Sedláček, Martin (referee) ; Škopán, Miroslav (advisor)
The bachelor thesis deals with the design of bridge crane lifting gear for a load not exceeding 10,000 kg. The work includes the design of the basic parts of the lifting gear, such as rope diameter, rope drum and rollers. There is also included the choice of standardized parts such as electric motor, crane gearbox, flexible clutch or drum brake. The last chapter describe the strength calculation of the rope drum and the bearing life calculation together with the design of welds and tight pen. The output of the bachelor thesis is the drawings of the cable drum weld and the mechanism of the lifting mechanism.
|
|
|
Design of electric tackle
Bádr, Miroslav ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
Purposes work was create technical documentation to an electrically driven tackle with actuated by hand undercarriage. Was booked up fundamental parameters like bearing, stroke and hoisting speed. First was effected calculation of load on pinion necks and an idle pulley. Subsequently was effected calculation for right election of a rope, an idle pulley, a rope drum and bearings for the rope drum. Up this calculation followed calculation for a right election of an electric motor and a shaft clutch. The documentation was complemented with pictures and tablets, that are seted near single decisive knots of the tackle. To the documentation was creationed how a suggested arrangement drawing so single subassemblies drawings.
|
|
|
Stroke mechanism of bridge crane
Ujčík, Miroslav ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
This thesis deals with the design of a stroke mechanism of the bridge crane with capacity of load 12 000 kg, which will have served as a plant crane with regular use. The first part of this thesis is devoted to the critical research of similar existing solutions, on the bases of which a suitable order of the arrangement is chosen. The other part of the thesis is devoted to the calculation of the main dimensions of the stroke, on the basis of which the individual components are selected, this are hoist elements of the rope system, such as roller, rope and rope drum, in which the fatigue calculation is performed. Another part of the thesis tackles design and parts calculation of the lifting mechanism, such as electric motor, clutch, brake and gearbox. The final part of the thesis is devoted to the calculation and control of the drum flail, bearing and tension calculation of the parallel key. Constituent part of this thesis is also drawings´ documentation, which enclosed drawing of the lifting mechanism assembly and the welding subassembly as well.
|
|
|
Crane Stroke Mechanism
Vydra, Tomáš ; Pokorný, Přemysl (referee) ; Škopán, Miroslav (advisor)
This thesis deals with design of crane stroke mechanism with lifting capacity of 12 500 kg. At the beginning is research of different design solutions, their comparison and finally selection of the most suitable conception. Before calculation part of each unit is short theoretical part, which brings basic information about issue, whose result in choice of product from catalogues. On the grounds of calculations, firstly hoist parts are chosen, such as rope, pulleys, rope drum and main units of crane mechanism – electric motor, gear box and brake with coupling. Final part deals with strength calculations of rope drum and drum shaft and design of his bearing housing. The practical part of the work are assembly drawings of crane stroke mechanism and rope drum weldment.
|
|
|
Crane Stroke Mechanism 25 t
Strommer, Bohumír ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
The purpose of this bachelor thesis is the proposal of stroke mechanism of travelling crab with lifting capacity 25,000 kg. The proposal consists in calculations of the main dimensions of individual parts of the stroke mechanism, as the pulleys diameters, overall dimensions of the rope drum, rope diameter, then the choice of gearbox, brake, coupling and electric motor. There is a strength calculation of the rope drum and the bearing life calculation. Thesis includes assembly drawing of travelling crab and drawing of rope drum weldment.
|
guest ::
